Contact us

Category: Informational

How to Migrate your PLC-5 Control Systems to a Modern Controls Platform

PLC-5 Controls Platform

Introduced in 1986, the PLC-5 was one of the first PLCs that could be programmed by a personal computer. According to the Rockwell Automation website, the PLC-5 boasts one of the largest install bases of any control platform. However, in 2017 Rockwell officially discontinued the platform. So, what should manufacturers who are still operating on […]

What are the Different Types of Collaborative Robots?

Collaborative robots, or cobots, allow for direct collaboration with humans to accomplish various tasks. Sometimes, this may include tasks that neither the robot nor a human could accomplish on their own. According to ISO 10218 part 1 and part 2, there are four main types of collaborative robots: safety monitored stop, speed and separation, power […]

What are the Different Types of Industrial Robots and Their Applications?

What are the Different Types of Industrial Robots and Their Applications? Countless manufacturers use industrial robots to automate tasks, enhance worker safety, and increase overall production output while reducing waste and operating costs. With industrial robots becoming more prevalent in manufacturing environments, there has been an increased demand for numerous different types of industrial robots […]

WATCH: Process Solutions Start-to-Finish Control Panel Manufacturing Process

Process Solutions recently built control panels for a food processing customer who specializes in the production of potato products. Along the way, we captured our manufacturing techniques and equipment in order to demonstrate our production abilities and expertise. Follow along and see what gives us the edge in efficiency and helps us produce a consistently […]

Panel Example 1
Drive Panel Example
Stacklight Panel Example
Panel Example 7
Panel Example 6
Panel Example 5
Panel Example 3
Panel Example 4
Panel Example 2
GE PLC Panel
VFD Panel Example 2
HMI Enclosure Interior Example
PLC Example Two
PLC Panel 2-door Example
Sloped Enclosure Example
Stainless Steel PLC Panel Example
Three Door VFD control panel with remote I/O and a disconnect switch
Two Door Panel Example
Two-door VFD Control Panel in stainless steel enclosure
Custom Control Panel with Servo Drives Installed
Custom PLC Control Panel Built by Process Solutions
Industrial Control Panel With and IO rack and Stainless Steel Enclosure
Custom Control Panel Builder
Electrical Control Panel in Stainless Steel Enclosure
VFD control panel with yellow terminal wiring
✖
Vaclav Mydlil
Sr. Director of Advanced Automation
Vaclav leads the dynamic Energy Management and Refrigeration Division at Process Solutions. With an impressive 20 years of experience in power demand management and refrigeration control systems, Vaclav is the driving force behind one of the company’s most innovative systems.

His expertise extends to PLC and cloud-based systems, ensuring seamless integration and optimal performance. Vaclav’s commitment to excellence is underscored by his Master of Science degree, specializing in control systems and electrical engineering, which he earned from the University of Life Sciences in Prague, Czech Republic.

Beyond the office, Vaclav’s passions include kayaking, snow skiing, and woodworking. Most of all, he enjoys moments spent with his wife and three kids.
✖
Steve Pelton
Vice President of Sales
With over 20 years at Process Solutions, Steve Pelton has held various roles, including Sales Engineer, Sales Director, and his current position as Vice President of Sales.

In addition, Steve oversees Process Solutions’ Energy Management and Refrigeration Division — ensuring the company remains at the forefront of energy-efficient solutions that cater to diverse food production applications. Steve also spearheads the strategic development of the company’s machine monitoring solutions, aligning them with client needs and market trends.

Steve’s background includes mechanical engineering, but his career trajectory has mainly focused on control systems marketing and management. His ability to bridge technical expertise with business acumen has been instrumental in Process Solutions’ growth.

Outside the office, Steve passions include conquering rugged trails on his mountain bike, perfecting his golf swing, and exploring new destinations with his family.
✖
Matt Barnes
Chief Financial Officer
Matt, with 28 years of financial strategy and accounting experience, plays a pivotal role at Process Solutions. As the Chief Financial Officer (CFO), he spearheads the company’s growth strategy, ensuring financial stability and health.

Beyond traditional financial management, Matt also oversees strategic initiatives aimed at optimizing Process Solutions’ on-hand inventory costs and availability. By fine-tuning inventory management, Matt ensures the company can meet client needs efficiently and maintain a healthy bottom line.

Matt graduated with a degree in accounting from Western Washington University and previously served as a financial executive at a large retail corporation. Outside of work, Matt enjoys traveling, soccer and spending time with his family.
✖
Kevin Orr
Executive Vice President
Kevin boasts an impressive tenure of over 25 years at Process Solutions. His position in the company has been multifaceted, spanning roles as a project engineer, engineering manager, and Process Solutions’ first Executive Vice President.

Under Kevin’s leadership, the food processing division has flourished, earning its reputation as of the most respected in the industry. Today, Kevin closely collaborates with executives from leading food processors and food processing equipment manufacturers across the country.

Kevin is a devoted husband and father with a passion for international travel.
✖
Todd Busby
Chief Executive Officer
Todd has dedicated over 30 years to Process Solutions, where he has worn multiple hats—from panel builder to project engineer and sales representative.

As the CEO of Process Solutions, Todd has spearheaded significant transformations. Under his leadership, the company has diversified into new industries, acquired a world-class facility, and more than doubled its size.

Todd, a native of the Puget Sound region, is a devoted husband, father, and avid outdoorsman. When he’s not at work, you’ll find him supporting his three kids in all their pursuits or hunting and fishing in Eastern Washington.
✖
David Crumpley
President
David has dedicated over 15 years to Process Solutions, where he has served as a Senior Engineer, Vice President, and now Chief Operating Officer. His multifaceted experience spans technical expertise, strategic leadership, and operational efficiency.

As the head of Process Solutions’ Water/Wastewater division, David orchestrated the modernization of the company’s internal systems and boosted operational efficiency across the organization.

In his current role as President, David continues to drive innovative initiatives aimed at expanding the company’s reach and further streamlining internal processes.

Outside of work, David enjoys spending quality time with his family and pursuing his passions as an avid outdoorsman.
✖

Schedule a demo

Complete the form below and we will respond quickly to schedule a demo.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Services

Service

We provide numerous remote and on-site services to our customers, including software upgrades, troubleshooting, hardware replacement, and feature additions. Our staff size provides us flexibility to quickly respond to standard time frames and emergency service.
✖
Services

Commission

Process Solutions provides commissioning services, as well as system start-ups. Our staff will travel anywhere in the world to help you get your system up and running. We start up hundreds of systems per year, and our licensed electricians on staff can pull permits as needed.
✖
Services

Document

Our Engineering and CAD department can create a wide range of documents, including functional specifications, software design documents, test manuals, O&M manuals, P&ID, system drawings, and network drawings. Drawings for FDA level documents are a particular specialty.
✖
Services

Code

Process Solutions software designers are equipped to handle any size job. We structure our program code to be easily read by both customers and engineers, making support and system upgrades fast and easy.
✖
Services

Build

Process Solutions builds over 3,000 panels per year. Our high-volume model makes our technicians experts in the field and provides our customers with an industry leading experience. Efficient manufacturing practices, mixed with automated manufacturing equipment, allows for quick and consistent job completion.
✖
Services

Design

Creation of custom designs for new and legacy systems. All drawings are template based using automatic CAD macros. Our techniques create an efficient design process with recognizable and easy to understand drawings.
✖

Get in touch

Complete the form below and we will respond quickly to discuss your project or questions.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.